Centralized Manageable Fiber Media Converter IEEE802.3z /
IEEE802.3u
General Information
10/100M,10/100/1000M remote manageable fiber media converters offer
a high price/performance ratio;
cover all functions of non-manageable fiber media converter
including variety of data rate, SM/MM, single
fiber and double fiber etc. with simple set-up and complete
function management interface, it supports
protocols like SNMP, WEB,TELNET and CONSOLE, and realizes the
integrated management to all chassis.
Hardware
• Support 10Base-T, 100Base-TX,1000Base-T.
• Meet standards IEEE802.3z, IEEE802.3u, IEEE802.3x and
IEEE802.3ah.
• With high performance auto-sensing exchanging chipset meeting
industrial standard, securing steady
and non-traffic jam data transmission and exchanging.
• Max.2046bytes packet at store-and-forward mode, Max. 9K bytes
packet at cut-through mode.
• AUTO-MDIX at electrical port, convenient for the user.
• low power consumption, low heat, standalone type with 10W special
communication power supply,
chassis with dual redundant power supply.
• Max safety power 100W to ensure the stable work of the
equipments.
• hot swap media converter( in card type) and management card,
single fiber or double fiber(single fiber
media converters should be used in pair), standalone t type or 16
slots chassis are optional
Advantages
• Master-and-slave structure, Max. cascading chassis number is 4.
• The failure of the management card won't influence the work of
other modules.
• Supporting remote and local management.
• Supporting protocols like CONSOLE, WEB and SNMP.
• Interface for management: RS232 Console Port (RJ45) and
10/100Mbps RJ-45 Ethernet port.
• Complete system information can be set up and displayed,
including the name of the chassis, terrain
information, IP address and the versions of the hardware and soft
ware.
• The status of 10/100M media converters with IP113A/C/F/M chipsets
can be monitored and queried at
the same chassis system.
• 10/100/1000M media converter card support SFP, CWDM SFP, DWDM SFP
and can also display it's
DDM function.
• Media converter card supports protocols like Q-in-Q Double Tag
VLAN, IEEE802.1q Tag VLAN and
IEEE802.3x Flow control.
• Detailed information regarding power supply can be tracked
including AC or DC, power and present
working status.
• Real time display of voltage and temperature on the cards of the
media converters.
• Each port at local or remote devices can be set up or tracked,
including the connecting status,
connecting speed, half/full duplex, port locked and LFP.
• With rate limiting, any rate between 0Mbps and 100M bps can be
set at the basic frame of 32Kbps,
and any rate between 0Mbps and 1000M bps can be set at the basic
frame of 64Kbps.
• Supporting Link Loopback test, precisely locating the failure,
convenient for link test.
• Remote power off alarming, precisely distinguish remote failure.
• With SNMP protocol, Trap Destination and Community Name and
related right can be set up, real time
receive and display of alarming information in way of SNMP Trap,
special supervising window, bumping
alarming information.
• Offering MIB files, convenient to be merged to the third party's
software like Openview and SNMPC.
• Powerful historical alarming and operating log information
tracking and management function.
• Flow statistic and pre-alarming function, real-time display of
the communication status at each port.
• Support Equipment remote-restart, system or module restart by
management software.
• With graded management mode (common user, super user and
administrator), and user identification
function.
• Reset to factory set up or dip switch status are optional.
• Supporting online upgrading by FTP.
• NMS supports network device auto-detect and auto-adding.
• Real-time display of voltage and temperature on the chassis and
the operating status of he fans.
• With centralized management and Top tree, several chassis can be
managed in the same interface at
the same time; with grouping management any converter can be
conveniently manipulated among many
converters
Technical Parameters
• Ethernet Interface
⑴Meet standards: IEEE802.3z, IEEE802.3u, IEEE802.3x and IEEE802.3ah
⑵Data rate: 10Mbps, 100Mbps, 1000M half/full duplex auto-sensing
⑶Connector: RJ-45
⑷ UTP CAT5 or CAT5E connecting with RJ-45, transmission distance at
100m.
• Fiber port
⑴Connector: ST, SC, FC
⑵Operating wavelength: 850nm, 1310nm at Multi-mode; 1310nm, 1550nm
at single mode.
⑶Optical fibers: Multi-mode: 50/125,62.5/125,100/140um;
Single-mode: 8.3/125,8.7/125,9/125,10/125um
• Basic working environment
Operating Temp: 0~50℃
Storage Temp: -10~70℃
Humidity: 5%~90%(non-condensing)
Dimension(standalone): 156mm(W)*128mm(D)
